| PART |
Description |
Maker |
| HV9308PJ-G HV9308-13 |
32-Channel Serial to Parallel Converter With High Voltage Push-Pull Outputs
|
Supertex, Inc
|
| HV9408PJ-G HV9408-13 |
32-Channel Serial to Parallel Converter With High Voltage Push-Pull Outputs
|
Supertex, Inc
|
| MCP100 MCP101 |
Microcontroller Supervisory Circuit with Push-Pull Output
|
Microchip Technology
|
| ISL28915FH6Z-T7 |
Nano Power, Push/Pull Output Comparator
|
Intersil Corporation
|
| L2293Q |
Push-pull four channel driver with diodes
Push-pull four channel driver with diodes
|
STMicroelectronics
|
| RKJXW1014002 |
8-directional Stick Switch (with Encoder / Center-push Function)
|
ALPS ELECTRIC CO.,LTD.
|
| 693063020911 |
SD Card Connector - Push & Pull - Short Type With Card Detection - 9 pins
|
Wurth Elektronik GmbH &...
|
| MCP6542 MCP6542-I/MS MCP6542-I/P MCP6542-I/SN MCP6 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current ...
Push-Pull Output Sub-Microamp Comparators
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package,
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package.
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current ...
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V,with typical quiescent current of ...
From old datasheet system
IC,VOLT COMPARATOR,DUAL,CMOS,TSSOP,8PIN,PLASTIC
|
Microchip Technology Inc.
|
| MAX6713Z MAX6713T MAX6713S MAX6713R MAX6713M MAX67 |
Microprocessor reset circuit with manual reset input. Reset threshold 2.63V. Output type active-low push-pull reset.
Microprocessor reset circuit with manual reset input. Reset threshold 4.38V. Output type active-low push-pull reset.
Microprocessor reset circuit with manual reset input. Reset threshold 4.63V. Output type active-low push-pull reset.
Microprocessor reset circuit with manual reset input. Reset threshold 2.93V. Output type active-low open-drain reset.
Microprocessor reset circuit with manual reset input. Reset threshold 2.93V. Output type active-high push-pull reset.
Microprocessor reset circuit with manual reset input. Reset threshold 2.93V. Output type active-low push-pull reset.
4-Pin SC70 Microprocessor Reset Circuits with Manual Reset Input 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO4
8-Bit Shift Register 16-SOIC -40 to 125 4引脚、SC70微处理器复位电路，带有手动复位输
8-Bit Shift Register 16-PDIP -40 to 125 4引脚、SC70微处理器复位电路，带有手动复位输
|
Maxim Integrated Produc...
MAXIM - Dallas Semiconductor
MAXIM[Maxim Integrated Products]
Maixm
Maxim Integrated Products, Inc.
|
| LTC1450CN LTC1450LCN LTC1450CG |
Parallel Input, 12-Bit Rail-to-Rail Micropower DACs in SSOP
Quad, Micropower, Push-Pull Outputs, LinCMOS(TM) Voltage Comparator 14-TSSOP 0 to 70
Quad, Micropower, Push-Pull Outputs, LinCMOS(TM) Voltage Comparator 14-SOIC 0 to 70 PARALLEL, WORD INPUT LOADING, 14 us SETTLING TIME, 12-BIT DAC, PDSO24
|
Linear Technology Corporation
Linear Technology, Corp.
|
| SGM8704 |
Push-Pull Output Comparator
|
Shengbang Microelectron...
|
|
